BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS EN 13523-22:2025 Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN 13523-23:2025 Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN 13523-29:2025 Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping) | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN 13523-3:2025 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN 13523-8:2025 Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN 1366-10+A1:2025 Fire resistance tests for service installations - Part 10: Smoke control dampers | 40.20 | BAS/TC 37 | 30.04.2025 | 29.06.2025 |
nsBAS EN 1366-8:2025 Fire resistance tests for service installations - Part 8: Smoke extraction ducts | 40.20 | BAS/TC 37 | 30.04.2025 | 29.06.2025 |
nsBAS EN 1366-9:2025 Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts | 40.20 | BAS/TC 37 | 30.04.2025 | 29.06.2025 |
nsBAS EN 13697:2025 Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and yeasticidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas without mechanical action - Test method and requirements without mechanical action (phase 2, step 2) | 40.20 | BAS/TC 49 | 20.03.2025 | 19.05.2025 |
nsBAS EN 13749+A1:2025 Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames | 40.20 | BAS/TC 46 | 23.04.2025 | 15.06.2025 |
nsBAS EN 13814-1+A1:2025 Safety of amusement rides and amusement devices - Part 1: Design and manufacture | 40.20 | BAS/TC 54 | 15.04.2025 | 14.06.2025 |
nsBAS EN 13814-2+A1:2025 Safety of amusement rides and amusement devices - Part 2: Operation, maintenance and use | 40.20 | BAS/TC 54 | 15.04.2025 | 14.06.2025 |
nsBAS EN 13814-3+A1:2025 Safety of amusement rides and amusement devices - Part 3: Requirements for inspection during design, manufacture, operation and use | 40.20 | BAS/TC 54 | 15.04.2025 | 14.06.2025 |
nsBAS EN 13819-1+A1:2025 Hearing protectors - Testing - Part 1: Physical test methods | 40.20 | BAS/TC 14 | 15.04.2025 | 15.06.2025 |
nsBAS EN 13819-3+A1:2025 Hearing protectors - Testing - Part 3: Supplementary acoustic test methods | 40.20 | BAS/TC 14 | 15.04.2025 | 15.06.2025 |
nsBAS EN 13979-1:2025 Railway applications - Wheelsets and bogies - Monobloc Wheels - Technical approval procedure - Part 1: Forged and rolled wheels | 40.20 | BAS/TC 46 | 23.04.2025 | 15.06.2025 |
nsBAS EN 13991:2025 Derivatives from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test methods | 40.20 | BAS/TC 27 | 14.04.2025 | 13.06.2025 |
nsBAS EN 14067-4:2025 Railway applications - Aerodynamics - Part 4: Requirements and assessment procedures for aerodynamics on open track | 40.20 | BAS/TC 46 | 23.04.2025 | 15.06.2025 |
nsBAS EN 14105:2025 Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents | 40.20 | BAS/TC 43 | 04.04.2025 | 03.06.2025 |
nsBAS EN 1417:2025 Plastics and rubber machines - Two-roll mills - Safety requirements | 40.20 | BAS/TC 50 | 25.02.2025 | 24.04.2025 |