Приказано 1-20 од 23 ставке.
Ознака стандардаФаза израдеБАС/ТКДатум реализацијеПредвиђени датум наредне фазе
  
prBAS EN 13501-3:2026
Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ventilation ducts and fire dampers and/or power, control and communication cables
00.99BAS/TC 3720.11.202503.12.2025
prBAS EN 1364-6:2026
Fire resistance tests for non-loadbearing elements - Part 6: Open-state cavity barriers
00.99BAS/TC 3720.11.202503.12.2025
prBAS EN 1366-3+A1/Cor1:2026
Fire resistance tests for service installations - Part 3: Penetration seals
00.99BAS/TC 3720.11.202503.12.2025
prBAS EN 1366-3+A1:2026
Fire resistance tests for service installations - Part 3: Penetration seals
00.99BAS/TC 3720.11.202503.12.2025
prBAS EN 14135:2026
Covering - Determination of fire protection ability
00.99BAS/TC 3720.11.202503.12.2025
prBAS EN 15269-4:2026
Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 4: Fire resistance of hinged and pivoted glass doorsets
00.99BAS/TC 3720.11.202503.12.2025
prBAS EN 15979:2026
Testing of ceramic raw materials and ceramic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by optical emission spectrometry by direct current arc excitation (DCArc-OES)
00.99BAS/TC 3720.11.202503.12.2025
prBAS EN 15991:2026
Testing of ceramic raw materials and ceramic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by inductively coupled plasma optical emission spectrometry with electrothermal vaporisation (ETV-ICP-OES)
00.99BAS/TC 3720.11.202503.12.2025
prBAS EN ISO 14544:2026
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of compressive properties
00.99BAS/TC 3720.11.202503.12.2025
prBAS EN ISO 14574:2026
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties
00.99BAS/TC 3720.11.202503.12.2025
prBAS EN ISO 17138:2026
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of flexural strength
00.99BAS/TC 3720.11.202503.12.2025
prBAS EN ISO 19628:2026
Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of specific heat capacity
00.99BAS/TC 3720.11.202503.12.2025
prBAS EN ISO 20505:2026
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of the interlaminar shear strength and shear modulus of continuous-fibre-reinforced composites by the compression of double-notched test pieces and by the Iosipescu test
00.99BAS/TC 3720.11.202503.12.2025
prBAS EN ISO 2477:2026
Shaped insulating refractory products - Determination of permanent change in dimensions on heating
00.99BAS/TC 3720.11.202503.12.2025
prBAS EN ISO 4255:2026
Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of axial tensile properties of tubes
00.99BAS/TC 3720.11.202503.12.2025
prBAS EN ISO 9239-1:2026
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source
00.99BAS/TC 3720.11.202503.12.2025
prBAS ISO 19702:2026
Sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
00.99BAS/TC 3720.11.202503.12.2025
prBAS ISO 2478:2026
Dense shaped refractory products — Determination of permanent change in dimensions on heating
00.99BAS/TC 3720.11.202503.12.2025
prBAS ISO 3008-1:2026
Fire resistance tests — Door and shutter assemblies — Part 1: General requirements
00.99BAS/TC 3720.11.202503.12.2025
prBAS ISO 5014:2026
Dense and insulating shaped refractory products — Determination of modulus of rupture at ambient temperature
00.99BAS/TC 3720.11.202503.12.2025