prBAS EN ISO 12217-1:2027

Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2022)


Опште информације
Статус:Пројекат
Број страница:79
Метода усвајања:Proglašavanje
Језик:engleski
Издање:2.
Датум реализације:09.11.2026
Предвиђени датум наредне фазе:27.11.2026
Технички комитет:BAS/TC 63, ВС1 - Општа стандардизација
ICS:
47.080, Мала пловила

Абстракт
This document specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats susceptible to swamping are also encompassed. The evaluation of stability and buoyancy properties using this document will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum total load. This document is principally applicable to boats propelled by human or mechanical power of 6 m up to 24 m hull length. However, it can also be applied to boats of under 6 m if they do not attain the desired design category specified in ISO 12217‑3 and they are decked and have quick-draining recesses which comply with ISO 11812. In relation to habitable multihulls, this document includes assessment of susceptibility to inversion, definition of viable means of escape and requirements for inverted flotation. This document excludes: —    inflatable and rigid-inflatable boats covered by the ISO 6185 series, except for references made in the ISO 6185 series to specific clauses of the ISO 12217 series; —    personal watercraft covered by ISO 13590 and other similar powered craft; —    gondolas and pedalos; —    sailing surfboards; —    surfboards, including powered surfboards; —    hydrofoils and hovercraft when not operating in the displacement mode; and —    submersibles. NOTE       Displacement mode means that the boat is only supported by hydrostatic forces. It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate.

Животни циклус
...

Изворни документ и степен усаглашености
EN ISO 12217-1:2025, идентичан
ISO 12217-1:2022, идентичан

Веза са BAS стандардима

Радни материјал

Сaмo члaнoви тeхничкoг кoмитeтa имajу приступ рaднoм мaтeриjaлу. Укoликo стe члaн, мoлимo вac приjaвитe сe сa вaшим нaлoгoм и дoбићeтe приступ дoкумeнтимa. Пријавите се