pnBAS EN 10209:2024
Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions
Опште информације
Статус:Пројекат
Број страница:26
Метода усвајања:Proglašavanje
Језик:engleski
Издање:3.
Датум реализације:22.02.2024
Предвиђени датум наредне фазе:14.03.2024
Технички комитет:BAS/TC 4, Челик, челични производи, обојени метали и легуре
ICS:
77.140.50, Прoизвoди и пoлупрoизвoди oд плoснaтoг чeликa
Абстракт
This document applies to cold rolled non-coated low carbon steel flat products in rolled widths equal to or over 600 mm and in thicknesses equal to or less than 3 mm, delivered in sheet, wide strip, slit wide strip or cut lengths obtained from slit wide strip or sheet.
It does not apply to cold rolled narrow strip (rolling width < 600 mm) or to cold rolled flat products for which there is a specific standard, in particular the following:
- cold-rolled low carbon steel flat products for cold forming (EN 10130);
- cold-rolled non-oriented electrical steel sheet and strip delivered in fully processed state (EN 10106);
- cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state (EN 10341);
- cold reduced blackplate (EN 10205);
- steel sheet and strip for welded gas cylinders (EN 10120);
- cold-rolled uncoated non-alloy mild steel narrow strip for cold forming (EN 10139);
- cold-rolled structural steels for general purposes;
- cold-rolled flat products made of high yield strength for cold forming (EN 10268).
Животни циклус
...
Изворни документ и степен усаглашености
EN 10209:2023, идентичан
Веза са BAS стандардима
Радни материјал
Сaмo члaнoви тeхничкoг кoмитeтa имajу приступ рaднoм мaтeриjaлу. Укoликo стe члaн, мoлимo вac приjaвитe сe сa вaшим нaлoгoм и дoбићeтe приступ дoкумeнтимa. Пријавите се