pnBAS EN 10209:2024
Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions
General information
Status:Project
Number of pages:26
Adoption method:Proglašavanje
Language:engleski
Edition:3.
Realization date:22.02.2024
Forseen date for next stage code:14.03.2024
Technical committee:BAS/TC 4, Steel, steel products, non-ferrous metals and alloys
ICS:
77.140.50, Flat steel products and semi-products
Abstract
This document applies to cold rolled non-coated low carbon steel flat products in rolled widths equal to or over 600 mm and in thicknesses equal to or less than 3 mm, delivered in sheet, wide strip, slit wide strip or cut lengths obtained from slit wide strip or sheet.
It does not apply to cold rolled narrow strip (rolling width < 600 mm) or to cold rolled flat products for which there is a specific standard, in particular the following:
- cold-rolled low carbon steel flat products for cold forming (EN 10130);
- cold-rolled non-oriented electrical steel sheet and strip delivered in fully processed state (EN 10106);
- cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state (EN 10341);
- cold reduced blackplate (EN 10205);
- steel sheet and strip for welded gas cylinders (EN 10120);
- cold-rolled uncoated non-alloy mild steel narrow strip for cold forming (EN 10139);
- cold-rolled structural steels for general purposes;
- cold-rolled flat products made of high yield strength for cold forming (EN 10268).
Lifecycle
...
Original document and degree of correspondence
EN 10209:2023, identical
Relation to BAS standards
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login