prBAS EN 1999-1-1:2024
Eurocode 9 - Design of aluminium structures - Part 1-1: General rules
Опште информације
Статус:Пројекат
Број страница:371
Метода усвајања:Proglašavanje
Језик:engleski
Издање:3.
Датум реализације:27.10.2023
Предвиђени датум наредне фазе:13.03.2024
Технички комитет:BAS/TC 58, Пројектовање грађевинских конструкција – Еврокод ЕН 1990, еврокодови 1, 7, 8 и 9
Директиве:
305/2011, Уредба (EU) 305/2011 о утврђивању усклађених услова за стављање на тржиште грађевинских производа
ICS:
91.010.30, Teхнички aспeкти
91.080.17, Алуминијумске конструкције
91.080.17, Алуминијумске конструкције
Абстракт
1.1 Scope of FprEN 1999-1-1
(1) FprEN 1999-1-1 gives basic design rules for structures made of wrought aluminium alloys and limited guidance for cast alloys (see Clause 5 and Annex C).
This document does not cover the following, unless otherwise explicitly stated in this document:
- components with material thickness less than 0,6 mm;
- welded components with material thickness less than 1,5 mm;
- connections with:
- steel bolts and pins with diameter less than 5 mm;
- aluminium bolts and pins with diameter less than 8 mm;
- rivets and thread forming screws with diameter less than 3,9 mm.
1.2 Assumptions
(1) In addition to the general assumptions of EN 1990 the following assumptions apply:
- execution complies with EN 1090-3 and EN 1090-5;
- the mechanical properties comply with the product standards listed in 5.2.2.
(2) EN 1999 is intended to be used in conjunction with:
- European Standards for construction products relevant for aluminium structures;
- EN 1090-1, Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components;
- EN 1090-3, Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures;
- EN 1090-5, Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications.
Животни циклус
...
Изворни документ и степен усаглашености
EN 1999-1-1:2023, идентичан
Радни материјал
Сaмo члaнoви тeхничкoг кoмитeтa имajу приступ рaднoм мaтeриjaлу. Укoликo стe члaн, мoлимo вac приjaвитe сe сa вaшим нaлoгoм и дoбићeтe приступ дoкумeнтимa. Пријавите се