prBAS EN 14770:2024

Bitumen and bituminous binders - Determination of complex shear modulus and phase angle - Dynamic Shear Rheometer (DSR)


Opšte informacije
Status:Projekt
Broj stranica:22
Metoda usvajanja:Proglašavanje
Jezik:engleski
Izdanje:3.
Datum realizacije:09.11.2023
Predviđeni datum naredne faze:12.03.2024
Tehnički komitet:BAS/TC 22, Cestogradnja
ICS:
75.140, Voskovi, bitumenski materijali i drugi naftni proizvodi
91.100.50, Veziva. Materijali za zaptivanje

Apstrakt
This document specifies a general method of using a dynamic shear rheometer (DSR) for measuring the rheological properties of bituminous binders. The procedure involves determining the complex shear modulus and phase angle of binders over a range of test frequencies and test temperatures when tested in oscillatory shear. From the test, the complex shear modulus, |G*|, and its phase angle, δ, at a given temperature and frequency are calculated, as well as the components G' and G" of the complex shear modulus. This method is applicable to un-aged, aged, stabilized and recovered bituminous binders. The test procedure in accordance with this document is not applicable for bituminous binders with particles larger than 250 μm (e.g. filler material, granulated rubber). WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Životni ciklus
...

Izvorni dokument i stepen usklađenosti
EN 14770:2023, identičan

Veza sa BAS standardima

Radni materijal

Samo članovi tehničkog komiteta imaju pristup radnom materijalu. Ukoliko ste član, molimo prijavite se sa vašim nalogom i dobićete pristup dokumentima. Prijavite se