pnBAS EN 10251:2025
Magnetni materijali – Metode određivanja geometrijskih karakteristika lima i trake kod čelika za elektrotehniku
Opšte informacije
Status:Projekt
Broj stranica:15
Metoda usvajanja:Proglašavanje
Jezik:engleski
Izdanje:4.
Datum realizacije:28.03.2025
Predviđeni datum naredne faze:15.04.2025
Tehnički komitet:BAS/TC 4, Čelik, čelični proizvodi, obojeni metali i legure
ICS:
29.030, Magnetni materijali
77.140.50, Proizvodi i poluproizvodi od plosnatog čelika
77.140.50, Proizvodi i poluproizvodi od plosnatog čelika
Apstrakt
This European Standard is intended to define the test methods used for the determination of the following geometrical characteristics of electrical steel sheet and strip:
— edge wave (wave factor);
— residual curvature;
— edge camber;
— deviation from the shearing line due to internal stresses;
— burr height of cut edges.
This European Standard applies to electrical steel sheet and strip intended for the construction of magnetic circuits and corresponding to Clauses B2, C21 and C22 of IEC 60404-1:2000.
Životni ciklus
...
Izvorni dokument i stepen usklađenosti
EN 10251:2024, identičan
Veza sa BAS standardima
Radni materijal
Samo članovi tehničkog komiteta imaju pristup radnom materijalu. Ukoliko ste član, molimo prijavite se sa vašim nalogom i dobićete pristup dokumentima. Prijavite se