BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS EN 62841-2-11/A11:2025 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws | 40.20 | BAS/TC 57 | 30.04.2025 | 30.06.2025 |
nsBAS EN 62927/A1:2025 Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical testing | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN 683-2:2025 Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties | 40.20 | BAS/TC 4 | 30.05.2025 | 30.06.2025 |
nsBAS EN 81-44:2025 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 44: Lifting appliances in wind turbines | 40.20 | BAS/TC 29 | 19.05.2025 | 18.07.2025 |
nsBAS EN 817:2025 Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications | 40.20 | BAS/TC 7 | 15.05.2025 | 15.07.2025 |
nsBAS EN 88-1+A1:2025 Safety and control devices for gas burners and gas burning appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa | 40.20 | BAS/TC 31 | 15.04.2025 | 14.06.2025 |
nsBAS EN IEC 60034-11:2025 Rotating electrical machines - Part 11: Thermal protection | 40.20 | BAS/TC 56 | 16.05.2025 | 16.07.2025 |
nsBAS EN IEC 60034-12:2025 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors | 40.20 | BAS/TC 56 | 16.05.2025 | 16.07.2025 |
nsBAS EN IEC 60034-2-1:2025 Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) | 40.20 | BAS/TC 56 | 16.05.2025 | 16.07.2025 |
nsBAS EN IEC 60034-2-2:2025 Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1 | 40.20 | BAS/TC 56 | 16.05.2025 | 16.07.2025 |
nsBAS EN IEC 60034-2-3:2025 Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors | 40.20 | BAS/TC 56 | 16.05.2025 | 16.07.2025 |
nsBAS EN IEC 60034-27-2:2025 Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation | 40.20 | BAS/TC 56 | 16.05.2025 | 16.07.2025 |
nsBAS EN IEC 60034-30-3:2025 Rotating electrical machines - Part 30-3: Efficiency classes of high voltage AC motors (IE-code) | 40.20 | BAS/TC 56 | 16.05.2025 | 16.07.2025 |
nsBAS EN IEC 60034-9:2025 Rotating electrical machines - Part 9: Noise limits | 40.20 | BAS/TC 56 | 16.05.2025 | 16.07.2025 |
nsBAS EN IEC 60076-22-7/Cor1:2025 Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings | 40.20 | BAS/TC 18 | 13.05.2025 | 06.07.2025 |
nsBAS EN IEC 60127-1:2025 Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links | 40.20 | BAS/TC 18 | 13.05.2025 | 06.07.2025 |
nsBAS EN IEC 60127-6:2025 Miniature fuses - Part 6: Fuse-holders for miniature fuse-links | 40.20 | BAS/TC 18 | 13.05.2025 | 06.07.2025 |
nsBAS EN IEC 60127-8/A1:2025 Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection | 40.20 | BAS/TC 18 | 13.05.2025 | 06.07.2025 |
nsBAS EN IEC 60136:2025 Dimensions, marking and testing of carbon brushes and dimensions of brush-holders for electrical machinery | 40.20 | BAS/TC 56 | 16.05.2025 | 16.07.2025 |
nsBAS EN IEC 60146-1-1:2025 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |