prBAS EN 12230:2024

Surfaces for sports areas - Test method for the determination of tensile properties of synthetic sports surfaces


Opće informacije
Status:Projekt
Broj stranica:15
Metoda usvajanja:Proglašavanje
Jezik:engleski
Izdanje:2.
Nadnevak realizacije:09.11.2023
Predviđeni nadnevak naredne faze:12.03.2024
Tehnički komitet:BAS/TC 22, Cestogradnja
ICS:
97.220.10, Sportski objekti

Apstrakt
This document specifies three methods for the determination of the tensile properties of materials used as surfaces, elastic layers and shockpads for sports areas. Method 1 measures the tensile strength of homogenous test specimens that are less than 25 mm in thickness. Method 2 measures the transversal tensile strength of homogenous test specimens that are more than 25 mm in thickness. Method 3 measures the tensile strength of sports surfaces or shockpads that are non-homogenous and contain slots or grooves cut into their structure. This document is applicable both to prefabricated sheet materials and to materials formed by casting of liquid systems cured in-situ. If the nature of the sports surface is such that a properly representative test piece cannot be prepared in the manner described in this document, then determination of tensile properties should not be attempted for quality control purposes, or as a predictor of performance in use. With such materials, it can be more appropriate to determine their compressive properties or other dynamic characteristics for these purposes.

Životni ciklus
...

Izvorni dokument i stepen usklađenosti
EN 12230:2023, identičan

Veza sa BAS standardima

Radni materijal

Samo članovi tehničkog komiteta imaju pristup radnom materijalu. Ukoliko ste član, molimo prijavite se sa vašim nalogom i dobićete pristup dokumentima. Пријавите се