BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS EN ISO 18563-3:2025 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 3: Complete systems | 40.20 | BAS/TC 24 | 22.04.2025 | 21.06.2025 |
nsBAS EN ISO 19675:2025 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT) | 40.20 | BAS/TC 24 | 22.04.2025 | 21.06.2025 |
nsBAS EN ISO 20137:2025 Leather - Chemical tests - Guidelines for testing critical chemicals in leather | 40.20 | BAS/TC 48 | 13.05.2025 | 14.07.2025 |
nsBAS EN ISO 20182:2025 Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns | 40.20 | BAS/TC 37 | 30.04.2025 | 29.06.2025 |
nsBAS EN ISO 20387/A11:2025 Biotechnology - Biobanking - General requirements for biobanking | 40.20 | BAS/TC 3 | 28.04.2025 | 27.06.2025 |
nsBAS EN ISO 20433:2025 Leather - Tests for colour fastness - Colour fastness to crocking | 40.20 | BAS/TC 48 | 13.05.2025 | 14.07.2025 |
nsBAS EN ISO 20701:2025 Leather - Tests for colour fastness - Colour fastness to saliva | 40.20 | BAS/TC 48 | 13.05.2025 | 14.07.2025 |
nsBAS EN ISO 21009-2:2025 Cryogenic vessels - Static vacuum-insulated vessels - Part 2: Operational requirements | 40.20 | BAS/TC 41 | 23.05.2025 | 22.07.2025 |
nsBAS EN ISO 21012:2025 Cryogenic vessels - Hoses | 40.20 | BAS/TC 41 | 23.05.2025 | 22.07.2025 |
nsBAS EN ISO 21068-1:2025 Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon - Part 1: General information, terminology and sample preparation | 40.20 | BAS/TC 37 | 30.04.2025 | 29.06.2025 |
nsBAS EN ISO 21068-2:2025 Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon - Part 2: Determination of volatile components, total carbon, free carbon, silicon carbide, total and free silicon, free and surface silica | 40.20 | BAS/TC 37 | 30.04.2025 | 29.06.2025 |
nsBAS EN ISO 21068-3:2025 Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents | 40.20 | BAS/TC 37 | 30.04.2025 | 29.06.2025 |
nsBAS EN ISO 21068-4:2025 Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon - Part 4: XRD methods | 40.20 | BAS/TC 37 | 30.04.2025 | 29.06.2025 |
nsBAS EN ISO 21135:2025 Chemicals for the leather tanning industry - Determination of the total content of certain bisphenols | 40.20 | BAS/TC 48 | 13.05.2025 | 14.07.2025 |
nsBAS EN ISO 21265:2025 Building and civil engineering sealants - Assessment of the fungal growth on sealant surfaces | 40.20 | BAS/TC 9 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 21388-2:2025 Acoustics - Hearing Aid Fitting Management - Part 2: Tele-services as part of hearing aid fitting management (tHAFM) | 40.20 | BAS/TC 36 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 21789:2025 Gas turbine applications - Safety | 40.20 | BAS/TC 56 | 16.05.2025 | 16.07.2025 |
nsBAS EN ISO 21971:2025 Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure - Determination of hoop tensile properties of tubes | 40.20 | BAS/TC 37 | 30.04.2025 | 29.06.2025 |
nsBAS EN ISO 22036:2025 Environmental solid matrices - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES) | 40.20 | BAS/TC 7 | 15.05.2025 | 15.07.2025 |
nsBAS EN ISO 22074-1:2025 Railway infrastructure - Rail fastening systems - Part 1: Vocabulary | 40.20 | BAS/TC 46 | 23.04.2025 | 15.06.2025 |