BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS EN ISO 12643-3:2025 Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems | 40.20 | BAS/TC 40 | 23.04.2025 | 22.06.2025 |
nsBAS EN ISO 12643-4:2025 Graphic technology - Safety requirements for graphic technology equipment and systems - Part 4: Converting equipment and systems | 40.20 | BAS/TC 40 | 23.04.2025 | 22.06.2025 |
nsBAS EN ISO 12643-5:2025 Graphic technology - Safety requirements for graphic technology equipment and systems - Part 5: Manually-fed stand-alone platen presses | 40.20 | BAS/TC 40 | 23.04.2025 | 22.06.2025 |
nsBAS EN ISO 13165-1:2025 Water quality - Radium-226 - Part 1: Test method using liquid scintillation counting | 40.20 | BAS/TC 7 | 15.05.2025 | 15.07.2025 |
nsBAS EN ISO 13577-2:2025 Industrial furnaces and associated processing equipment - Safety - Part 2: Combustion and fuel handling systems | 40.20 | BAS/TC 40 | 23.04.2025 | 22.06.2025 |
nsBAS EN ISO 13585:2025 Brazing - Qualification testing of brazers and brazing operators | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 13943:2025 Fire safety - Vocabulary | 40.20 | BAS/TC 37 | 30.04.2025 | 29.06.2025 |
nsBAS EN ISO 14001/A1:2025 Environmental management systems - Requirements with guidance for use - Amendment 1: Climate action changes | 40.20 | BAS/TC 7 | 15.05.2025 | 15.07.2025 |
nsBAS EN ISO 14083:2025 Greenhouse gases - Quantification and reporting of greenhouse gas emissions arising from transport chain operations | 40.20 | BAS/TC 35 | 11.06.2025 | 10.08.2025 |
nsBAS EN ISO 14184-3:2025 Textiles - Determination of formaldehyde - Part 3: Free and hydrolysed formaldehyde (extraction method) by liquid chromatography | 40.20 | BAS/TC 48 | 13.05.2025 | 14.07.2025 |
nsBAS EN ISO 14344:2025 Welding consumables - Procurement of filler materials and fluxes | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 14373:2025 Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 14456:2025 Gas cylinders - Gas properties and associated classification (FTSC) codes | 40.20 | BAS/TC 41 | 23.05.2025 | 22.07.2025 |
nsBAS EN ISO 14644-18:2025 Cleanrooms and associated controlled environments - Part 18: Assessment of suitability of consumables | 40.20 | BAS/TC 7 | 15.05.2025 | 15.07.2025 |
nsBAS EN ISO 15610:2025 Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 15611:2025 Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 15614-13:2025 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 15614-5:2025 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 15923-1:2025 Water quality - Determination of selected parameters by discrete analysis systems - Part 1: Ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate with photometric detection | 40.20 | BAS/TC 7 | 15.05.2025 | 15.07.2025 |
nsBAS EN ISO 15995/A1:2025 Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated - Amendment 1 | 40.20 | BAS/TC 31 | 15.04.2025 | 14.06.2025 |