BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
| Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
|---|---|---|---|---|
| nsBAS EN IEC 61169-23:2026 Radio-frequency connectors - Part 23: Pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor of 3,5 mm (0,1378 in) | 40.20 | BAS/TC 30 | 20.04.2026 | 19.06.2026 |
| nsBAS EN IEC 61188-6-3:2026 Circuit boards and circuit board assemblies - Design and use - Part 6-3: Land pattern design - Description of land pattern for through hole components (THT) | 40.20 | BAS/TC 64 | 26.02.2026 | 26.04.2026 |
| nsBAS EN IEC 61189-2-501:2026 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-501: Test methods for materials for interconnection structures - Measurement of resilience strength and resilience strength retention factor of flexible dielectric materials | 40.20 | BAS/TC 64 | 26.02.2026 | 26.04.2026 |
| nsBAS EN IEC 61189-2-720:2026 Test methods for electrical materials, circuit boards and other interconnection structures and assemblies - Part 2-720: Detection of defects in interconnection structures by measurement of capacitance | 40.20 | BAS/TC 64 | 26.02.2026 | 26.04.2026 |
| nsBAS EN IEC 61189-2-801:2026 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials | 40.20 | BAS/TC 64 | 26.02.2026 | 26.04.2026 |
| nsBAS EN IEC 61189-2-803:2026 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-803: Test methods for Z-axis expansion of base materials and printed boards | 40.20 | BAS/TC 64 | 26.02.2026 | 26.04.2026 |
| nsBAS EN IEC 61189-2-804:2026 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-804: Test methods for time to delamination - T260, T288, T300 | 40.20 | BAS/TC 64 | 26.02.2026 | 26.04.2026 |
| nsBAS EN IEC 61189-2-805:2026 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-805: X/Y CTE test for thin base materials by TMA | 40.20 | BAS/TC 64 | 26.02.2026 | 26.04.2026 |
| nsBAS EN IEC 61189-2-807:2026 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-807: Test methods for materials for interconnection structures - Decomposition temperature (Td) using TGA | 40.20 | BAS/TC 64 | 26.02.2026 | 26.04.2026 |
| nsBAS EN IEC 61189-2-808:2026 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-808: Thermal resistance of an assembly by thermal transient method | 40.20 | BAS/TC 64 | 26.02.2026 | 26.04.2026 |
| nsBAS EN IEC 61189-2-809:2026 Test methods for electrical materials, circuit boards and other interconnection structures and assemblies - Part 2-809: X/Y coefficient of thermal expansion (CTE) test for thick base materials by TMA | 40.20 | BAS/TC 64 | 26.02.2026 | 26.04.2026 |
| nsBAS EN IEC 61203:2026 Synthetic organic esters - Guidelines for maintenance and use in electrical equipment | 40.20 | BAS/TC 53 | 20.05.2026 | 18.07.2026 |
| nsBAS EN IEC 61249-2-51:2026 Materials for printed boards and other interconnecting structures - Part 2-51: Reinforced base materials, clad and unclad - Base materials for integrated circuit card carrier tape, unclad | 40.20 | BAS/TC 64 | 26.02.2026 | 26.04.2026 |
| nsBAS EN IEC 61249-6-3:2026 Materials for printed boards and other interconnecting structures - Part 6-3: Sectional specification set for reinforcement materials - Specification for finished fabric woven from "E" glass for printed boards | 40.20 | BAS/TC 64 | 26.02.2026 | 26.04.2026 |
| nsBAS EN IEC 61300-2-5/A1:2026 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion | 40.20 | BAS/TC 5 | 07.04.2026 | 07.06.2026 |
| nsBAS EN IEC 61300-3-46:2026 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-46: Examinations and measurements - Bore diameter in rectangular ferrules | 40.20 | BAS/TC 5 | 07.04.2026 | 07.06.2026 |
| nsBAS EN IEC 61326-2-6:2026 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical electrical equipment | 40.20 | BAS/TC 51 | 14.05.2026 | 10.07.2026 |
| nsBAS EN IEC 61340-4-11:2026 Electrostatics - Part 4-11: Standard test methods for specific applications - Testing of electrostatic properties of composite IBC | 40.20 | BAS/TC 64 | 26.02.2026 | 26.04.2026 |
| nsBAS EN IEC 61340-4-6:2026 Electrostatics - Part 4-6: Standard test methods for specific applications - Wrist straps | 40.20 | BAS/TC 64 | 26.02.2026 | 26.04.2026 |
| nsBAS EN IEC 61340-4-7:2026 Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization | 40.20 | BAS/TC 64 | 26.02.2026 | 26.04.2026 |