BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS EN ISO 34101-1/A1:2025 Sustainable and traceable cocoa - Part 1: Requirements for cocoa sustainability management systems - Amendment 1: Climate action changes | 40.20 | BAS/TC 43 | 04.04.2025 | 03.06.2025 |
nsBAS EN ISO 3451-4:2025 Plastics - Determination of ash - Part 4: Polyamides | 40.20 | BAS/TC 50 | 25.02.2025 | 24.04.2025 |
nsBAS EN ISO 3506-5:2025 Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications | 40.20 | BAS/TC 16 | 10.04.2025 | 09.06.2025 |
nsBAS EN ISO 3549:2025 Zinc dust pigments for paints - Specifications and test methods | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 3581:2025 Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 3671:2025 Plastics - Aminoplastic moulding materials - Determination of volatile matter | 40.20 | BAS/TC 50 | 25.02.2025 | 24.04.2025 |
nsBAS EN ISO 3677:2025 Filler metal for brazing - Designation | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 3834-6:2025 Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 series | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 3838/A1:2025 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods - Amendment 1 | 40.20 | BAS/TC 11 | 14.04.2025 | 13.06.2025 |
nsBAS EN ISO 3882:2025 Metallic and other inorganic coatings - Review of methods of measurement of thickness | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 4080:2025 Rubber and plastics hoses and tubing, and their assemblies - Determination of permeability to gas | 40.20 | BAS/TC 50 | 25.02.2025 | 24.04.2025 |
nsBAS EN ISO 4259-5:2025 Petroleum and related products - Precision of measurement methods and results - Part 5: Statistical assessment of agreement between two different measurement methods that claim to measure the same property | 40.20 | BAS/TC 11 | 14.04.2025 | 13.06.2025 |
nsBAS EN ISO 4349:2025 Solid recovered fuels - Determination of the Recycling Index for co-processing | 40.20 | BAS/TC 27 | 14.04.2025 | 13.06.2025 |
nsBAS EN ISO 4608:2025 Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature | 40.20 | BAS/TC 50 | 25.02.2025 | 24.04.2025 |
nsBAS EN ISO 4628-10:2025 Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 4628-6:2025 Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6: Assessment of degree of chalking by tape method | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 4641:2025 Rubber hoses and hose assemblies for water suction and discharge - Specification | 40.20 | BAS/TC 50 | 25.02.2025 | 24.04.2025 |
nsBAS EN ISO 4766:2025 Fasteners - Slotted set screws with flat point | 40.20 | BAS/TC 16 | 10.04.2025 | 09.06.2025 |
nsBAS EN ISO 50001/A1:2025 Energy management systems - Requirements with guidance for use - Amendment 1: Climate action changes | 40.20 | BAS/TC 10 | 25.03.2025 | 18.05.2025 |
nsBAS EN ISO 5114-1:2025 Acoustics - Determination of uncertainties associated with sound emission measures - Part 1: Sound power levels determined from sound pressure measurements | 40.20 | BAS/TC 36 | 24.04.2025 | 23.06.2025 |