BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS EN ISO 16000-11:2025 Indoor air - Part 11: Determination of the emission of volatile organic compounds from samples of building products and furnishing - Sampling, storage of samples and preparation of test specimens | 40.20 | BAS/TC 7 | 15.05.2025 | 15.07.2025 |
nsBAS EN ISO 16000-9:2025 Indoor air - Part 9: Determination of the emission of volatile organic compounds from samples of building products and furnishing - Emission test chamber method | 40.20 | BAS/TC 7 | 15.05.2025 | 15.07.2025 |
nsBAS EN ISO 16032:2025 Acoustics - Measurement of sound pressure level from service equipment or activities in buildings - Engineering method | 40.20 | BAS/TC 36 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 16484-1:2025 Building automation and control systems (BACS) - Part 1: Project specification and implementation | 40.20 | BAS/TC 51 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 16486-1:2025 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General | 40.20 | BAS/TC 53 | 09.06.2025 | 08.08.2025 |
nsBAS EN ISO 16890-3:2025 Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured | 40.20 | BAS/TC 7 | 15.05.2025 | 15.07.2025 |
nsBAS EN ISO 16946:2025 Non-destructive testing - Ultrasonic testing - Specification for a step wedge standard block | 40.20 | BAS/TC 24 | 22.04.2025 | 21.06.2025 |
nsBAS EN ISO 17294-1:2025 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General requirements | 40.20 | BAS/TC 7 | 15.05.2025 | 15.07.2025 |
nsBAS EN ISO 17294-2:2025 Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes | 40.20 | BAS/TC 7 | 15.05.2025 | 15.07.2025 |
nsBAS EN ISO 17672:2025 Brazing - Filler metals | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 17871/A1:2025 Gas cylinders - Quick-release cylinder valves - Specification and type testing - Amendment 1 | 40.20 | BAS/TC 41 | 23.05.2025 | 22.07.2025 |
nsBAS EN ISO 18081:2025 Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission | 40.20 | BAS/TC 24 | 22.04.2025 | 21.06.2025 |
nsBAS EN ISO 18119/A2:2025 Gas cylinders - Seamless steel and seamless aluminium-alloy gas cylinders and tubes - Periodic inspection and testing - Amendment 2 | 40.20 | BAS/TC 41 | 23.05.2025 | 22.07.2025 |
nsBAS EN ISO 18187:2025 Soil quality - Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis | 40.20 | BAS/TC 7 | 15.05.2025 | 15.07.2025 |
nsBAS EN ISO 18246:2025 Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply | 40.20 | BAS/TC 35 | 11.06.2025 | 10.08.2025 |
nsBAS EN ISO 18276:2025 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 18279:2025 Brazing - Imperfections in brazed joints | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 1833-4:2025 Textiles - Quantitative chemical analysis - Part 4: Mixtures of certain protein fibres with certain other fibres (method using hypochlorite) | 40.20 | BAS/TC 48 | 13.05.2025 | 14.07.2025 |
nsBAS EN ISO 18393-1:2025 Thermal insulation products - Determination of settlement - Part 1: Loose-fill insulation for ventilated attics simulating humidity and temperature cycling | 40.20 | BAS/TC 36 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 18563-2:2025 Non-destructive testing - Characterization and verification of ultrasonic phased array equipment - Part 2: Array probes | 40.20 | BAS/TC 24 | 22.04.2025 | 21.06.2025 |