BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS EN ISO 11855-3/A1:2025 Building environment design - Embedded radiant heating and cooling systems - Part 3: Design and dimensioning - Amendment 1 | 40.20 | BAS/TC 47 | 24.03.2025 | 23.05.2025 |
nsBAS EN ISO 11855-4/A1:2025 Building environment design - Embedded radiant heating and cooling systems - Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) - Amendment 1 | 40.20 | BAS/TC 47 | 24.03.2025 | 23.05.2025 |
nsBAS EN ISO 11855-5/A1:2025 Building environment design - Embedded radiant heating and cooling systems - Part 5: Installation - Amendment 1 | 40.20 | BAS/TC 47 | 24.03.2025 | 23.05.2025 |
nsBAS EN ISO 11855-8:2025 Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 8: Electrical heating systems | 40.20 | BAS/TC 47 | 24.03.2025 | 23.05.2025 |
nsBAS EN ISO 11890-1:2025 Paints and varnishes - Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content - Part 1: Gravimetric method for VOC determination | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 11890-2/A1:2025 Paints and varnishes - Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content - Part 2: Gas-chromatographic method - Amendment 1 | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 11979-7:2025 Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations of intraocular lenses for the correction of aphakia | 40.20 | BAS/TC 25 | 10.04.2025 | 09.06.2025 |
nsBAS EN ISO 11997-3:2025 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 3: Testing of coating systems on materials and components in automotive construction | 40.20 | BAS/TC 39 | 11.04.2025 | 11.06.2025 |
nsBAS EN ISO 12156-1:2025 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method | 40.20 | BAS/TC 11 | 14.04.2025 | 13.06.2025 |
nsBAS EN ISO 12185:2025 Crude petroleum, petroleum products and related products - Determination of density - Laboratory density meter with an oscillating U tube sensor | 40.20 | BAS/TC 11 | 14.04.2025 | 13.06.2025 |
nsBAS EN ISO 12224-1:2025 Solder wire, solid and flux-cored - Specification and test methods - Part 1: Classification and performance requirements | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 12224-2:2025 Solder wire, solid and flux-cored - Specification and test methods - Part 2: Determination of flux content | 40.20 | BAS/TC 2 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 12311:2025 Personal protective equipment - Test methods for sunglasses and related eyewear | 40.20 | BAS/TC 14 | 15.04.2025 | 15.06.2025 |
nsBAS EN ISO 12312-1/A11:2025 Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use | 40.20 | BAS/TC 14 | 15.04.2025 | 15.06.2025 |
nsBAS EN ISO 12643-1:2025 Graphic technology - Safety requirements for graphic technology equipment and systems - Part 1: General requirements | 40.20 | BAS/TC 40 | 23.04.2025 | 22.06.2025 |
nsBAS EN ISO 12643-2:2025 Graphic technology - Safety requirements for graphic technology equipment and systems - Part 2: Prepress and press equipment and systems | 40.20 | BAS/TC 40 | 23.04.2025 | 22.06.2025 |
nsBAS EN ISO 12643-3:2025 Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems | 40.20 | BAS/TC 40 | 23.04.2025 | 22.06.2025 |
nsBAS EN ISO 12643-4:2025 Graphic technology - Safety requirements for graphic technology equipment and systems - Part 4: Converting equipment and systems | 40.20 | BAS/TC 40 | 23.04.2025 | 22.06.2025 |
nsBAS EN ISO 12643-5:2025 Graphic technology - Safety requirements for graphic technology equipment and systems - Part 5: Manually-fed stand-alone platen presses | 40.20 | BAS/TC 40 | 23.04.2025 | 22.06.2025 |
nsBAS EN ISO 12736-1:2025 Oil and gas industries including lower carbon energy - Wet thermal insulation systems for pipelines and subsea equipment - Part 1: Validation of materials and insulation systems | 40.20 | BAS/TC 11 | 14.04.2025 | 13.06.2025 |