BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS EN IEC 60794-2-24:2025 Optical fibre cables - Part 2-24: Indoor cables - Detail specification for multiple multi-fibre unit cables for use in MPO connector terminated breakout cable assemblies | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60851-3:2025 Winding wires - Test methods - Part 3: Mechanical properties | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN IEC 60938-2-1:2025 Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required | 40.20 | BAS/TC 15 | 02.04.2025 | 29.05.2025 |
nsBAS EN IEC 60939-3:2025 Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate | 40.20 | BAS/TC 15 | 02.04.2025 | 29.05.2025 |
nsBAS EN IEC 60947-4-2/A1:2025 Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - Semiconductor motor controllers, starters and soft-starters | 40.20 | BAS/TC 52 | 23.04.2025 | 23.06.2025 |
nsBAS EN IEC 60947-4-3:2025 Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - Semiconductor controllers and semiconductor contactors for non-motor loads | 40.20 | BAS/TC 52 | 23.04.2025 | 23.06.2025 |
nsBAS EN IEC 60966-2-1:2025 Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN IEC 60966-2-2:2025 Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN IEC 60966-3:2025 Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN IEC 60966-3-1:2025 Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN IEC 60966-4:2025 Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN IEC 60966-4-1:2025 Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN IEC 61000-2-4:2025 Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in power distribution systems in industrial locations for low-frequency conducted disturbances | 40.20 | BAS/TC 15 | 02.04.2025 | 29.05.2025 |
nsBAS EN IEC 61000-3-2/A2:2025 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) | 40.20 | BAS/TC 15 | 02.04.2025 | 29.05.2025 |
nsBAS EN IEC 61000-4-11/Cor2:2025 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase | 40.20 | BAS/TC 15 | 02.04.2025 | 29.05.2025 |
nsBAS EN IEC 61000-4-6:2025 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | 40.20 | BAS/TC 15 | 02.04.2025 | 29.05.2025 |
nsBAS EN IEC 61010-2-201:2025 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment | 40.20 | BAS/TC 51 | 24.04.2025 | 23.06.2025 |
nsBAS EN IEC 61084-1/A11:2025 Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN IEC 61084-1:2025 Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN IEC 61084-2-1/A11:2025 Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |