BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS EN IEC 60728-11:2025 Cable networks for television signals, sound signals and interactive services - Part 11: Safety | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60728-113:2025 Cable networks for television signals, sound signals and interactive services - Part 113: Optical systems for broadcast signal transmissions loaded with digital channels only | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60730-1/A11:2025 Automatic electrical controls - Part 1: General requirements | 40.20 | BAS/TC 51 | 24.04.2025 | 23.06.2025 |
nsBAS EN IEC 60793-1-22:2025 Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60793-1-41:2025 Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60793-1-44:2025 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60793-1-45:2025 Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60793-1-46:2025 Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in attenuation | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60794-1-1:2025 Optical fibre cables - Part 1-1: Generic specification - General | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60794-1-104:2025 Optical fibre cables - Part 1-104: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Impact, method E4 | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60794-1-111:2025 Optical fibre cables - Part 1-111: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Bend, method E11 | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60794-1-201:2025 Optical fibre cables - Part 1-201: Generic specification - Basic optical cable test procedures - Environmental test methods - Temperature cycling, method F1 | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60794-1-209:2025 Optical fibre cables - Part 1-209: Generic specification - Basic optical cable test procedures - Environmental test methods - Ageing, method F9 | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60794-1-212:2025 Optical fibre cables - Part 1-212: Generic specification - Basic optical cable test procedures - Environmental test methods - Temperature cycling with cable elements fixed at both ends, Method F12 | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60794-1-213:2025 Optical fibre cables - Part 1-213: Generic specification - Basic optical cable test procedures - Environmental test methods - Microduct pressure withstand, method F13 | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60794-1-217:2025 Optical fibre cables - Part 1-217: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable shrinkage (fibre protrusion), Method F17 | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60794-1-306:2025 Optical fibre cables - Part 1-306: Generic specification - Basic optical cable test procedures - Cable element test methods - Ribbon torsion, Method G6 | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60794-1-311:2025 Optical fibre cables - Part 1-311: Generic specification - Basic optical cable test procedures - Cable element test methods - Tensile strength and elongation test for cable elements, Method G11A | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60794-1-312:2025 Optical fibre cables - Part 1-312: Generic specification - Basic optical cable test procedures - Cable element test methods - Elongation test for buffer tubes at low temperature, Method G11B | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |
nsBAS EN IEC 60794-2-23:2025 Optical fibre cables - Part 2-23: Indoor cables - Detail specification for multi-fibre cables for use in MPO connector terminated cable assemblies | 40.20 | BAS/TC 5 | 25.04.2025 | 25.06.2025 |