BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS EN 60898-1/A11:2025 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN 61000-3-12/A1:2025 Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase | 40.20 | BAS/TC 15 | 02.04.2025 | 29.05.2025 |
nsBAS EN 61242/A1/Cor1:2025 Electrical accessories - Cable reels for household and similar purposes | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN 613:2025 Independent closed-fronted gas-fired type B11, type C11, type C31 and type C91 heaters | 40.20 | BAS/TC 31 | 15.04.2025 | 14.06.2025 |
nsBAS EN 61786-1/A1:2025 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments | 40.20 | BAS/TC 15 | 02.04.2025 | 29.05.2025 |
nsBAS EN 62751-2/A2:2025 Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN 62752/Cor1:2025 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPDs) | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN 62927/A1:2025 Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical testing | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN 751-3+A1:2025 Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings | 40.20 | BAS/TC 16 | 10.04.2025 | 09.06.2025 |
nsBAS EN 813:2025 Personal fall protection equipment - Sit harnesses | 40.20 | BAS/TC 14 | 15.04.2025 | 15.06.2025 |
nsBAS EN 88-1+A1:2025 Safety and control devices for gas burners and gas burning appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa | 40.20 | BAS/TC 31 | 15.04.2025 | 14.06.2025 |
nsBAS EN 915:2025 Gymnastic equipment - Asymmetric bars - Requirements and test methods including safety | 40.20 | BAS/TC 14 | 15.04.2025 | 15.06.2025 |
nsBAS EN 958:2025 Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods | 40.20 | BAS/TC 14 | 15.04.2025 | 15.06.2025 |
nsBAS EN IEC 55036/A1:2025 Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz | 40.20 | BAS/TC 15 | 02.04.2025 | 29.05.2025 |
nsBAS EN IEC 60146-1-1:2025 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN IEC 60309-1/Cor1:2025 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN IEC 60317-0-3:2025 Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN IEC 60317-12/A1:2025 Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120 | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN IEC 60317-27-1/A1:2025 Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |
nsBAS EN IEC 60317-27-2/A1:2025 Specifications for particular types of winding wires - Part 27-2: Paper tape covered round aluminium wire | 40.20 | BAS/TC 30 | 28.04.2025 | 27.06.2025 |