BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS EN ISO 23500-2:2025 Preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies | 40.20 | BAS/TC 25 | 10.04.2025 | 09.06.2025 |
nsBAS EN ISO 23500-3:2025 Preparation and quality management of fluids for haemodialysis and related therapies - Part 3: Water for haemodialysis and related therapies | 40.20 | BAS/TC 25 | 10.04.2025 | 09.06.2025 |
nsBAS EN ISO 23500-4:2025 Preparation and quality management of fluids for haemodialysis and related therapies - Part 4: Concentrates for haemodialysis and related therapies | 40.20 | BAS/TC 25 | 10.04.2025 | 09.06.2025 |
nsBAS EN ISO 23500-5:2025 Preparation and quality management of fluids for haemodialysis and related therapies - Part 5: Quality of dialysis fluid for haemodialysis and related therapies | 40.20 | BAS/TC 25 | 10.04.2025 | 09.06.2025 |
nsBAS EN ISO 23581:2025 Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscometer | 40.20 | BAS/TC 11 | 14.04.2025 | 13.06.2025 |
nsBAS EN ISO 23662:2025 Definitions and technical criteria for foods and food ingredients suitable for vegetarians or vegans and for labelling and claims | 40.20 | BAS/TC 43 | 04.04.2025 | 03.06.2025 |
nsBAS EN ISO 23766:2025 Thermal insulating products for industrial installations - Determination of the coefficient of linear thermal expansion at sub-ambient temperatures | 40.20 | BAS/TC 36 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 23953-1:2025 Refrigerated display cabinets - Part 1: Vocabulary | 40.20 | BAS/TC 47 | 24.03.2025 | 23.05.2025 |
nsBAS EN ISO 23953-2:2025 Refrigerated display cabinets - Part 2: Classification, requirements and test conditions | 40.20 | BAS/TC 47 | 24.03.2025 | 23.05.2025 |
nsBAS EN ISO 2398:2025 Rubber hoses, textile-reinforced, for compressed air - Specification | 40.20 | BAS/TC 50 | 25.02.2025 | 24.04.2025 |
nsBAS EN ISO 24194/A1:2025 Solar energy - Collector fields - Check of performance - Amendment 1 | 40.20 | BAS/TC 47 | 24.03.2025 | 23.05.2025 |
nsBAS EN ISO 24231:2025 Protective clothing - Protection against rain - Test method for ready-made garments against high-energy droplets from above | 40.20 | BAS/TC 14 | 15.04.2025 | 15.06.2025 |
nsBAS EN ISO 24252/A11:2025 Biogas systems - Non-household and non-gasification | 40.20 | BAS/TC 31 | 15.04.2025 | 14.06.2025 |
nsBAS EN ISO 24342:2025 Resilient and textile floor-covering - Determination of side length, edge straightness and squareness of tiles and planks | 40.20 | BAS/TC 36 | 24.04.2025 | 23.06.2025 |
nsBAS EN ISO 24478:2025 Railway applications - Braking - General vocabulary | 40.20 | BAS/TC 46 | 23.04.2025 | 15.06.2025 |
nsBAS EN ISO 25119-1/A1:2025 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development - Amendment 1 | 40.20 | BAS/TC 45 | 15.04.2025 | 14.06.2025 |
nsBAS EN ISO 25119-1:2025 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development | 40.20 | BAS/TC 45 | 15.04.2025 | 14.06.2025 |
nsBAS EN ISO 25119-2:2025 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase | 40.20 | BAS/TC 45 | 15.04.2025 | 14.06.2025 |
nsBAS EN ISO 25119-3/A1:2025 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software - Amendment 1 | 40.20 | BAS/TC 45 | 15.04.2025 | 14.06.2025 |
nsBAS EN ISO 25119-3:2025 Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software | 40.20 | BAS/TC 45 | 15.04.2025 | 14.06.2025 |