Prikazuj 1-20 od 30 stavki.
Oznaka standardaFaza izradeBAS/TCNadnevak realizacijePredviđeni nadnevak naredne faze
  
prBAS CEN/TR 1591-6:2026
Flanges and their joints - Design rules for gasketed circular flange connections - Part 6: Background information
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN 15266:2026
Stainless steel pliable corrugated tubing kits for gas installation pipework with an operating pressure up to 0,2 MPa (2 bar)
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 10511:2026
Fasteners - Prevailing torque hexagon nuts - Thin nuts (with non-metallic insert)
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 10512:2026
Fasteners - Prevailing torque hexagon nuts - Regular nuts (with non-metallic insert), with fine pitch thread
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 10513:2026
Fasteners - Prevailing torque hexagon nuts - High nuts (all metal), with fine pitch thread
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 13669:2026
Fasteners - Grooved pins - General requirements
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 13670:2026
Fasteners - Reverse-taper grooved pins - One quarter-length progressive grooves on both sides
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 13672:2026
Fasteners - Parallel grooved pins - Half-length diamond grooves
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 15465:2026
Pipework - Stripwound metal hoses and hose assemblies
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 3506-3:2026
Fasteners - Mechanical properties of corrosion resistant stainless steel fasteners - Part 3: Set screws (and similar fasteners not under tensile stress) with specified grades and hardness classes
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 3506-4:2026
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws with specified grades and hardness classes
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 7040:2026
Fasteners - Prevailing torque hexagon nuts - Regular nuts (with non-metallic insert)
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 7041:2026
Fasteners - Prevailing torque hexagon nuts - High nuts (with non-metallic insert)
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 7042:2026
Fasteners - Prevailing torque hexagon nuts - High nuts (all metal)
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 7719:2026
Fasteners - Prevailing torque hexagon nuts - Regular nuts (all metal)
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 7720:2026
Fasteners - Prevailing torque hexagon nuts - High nuts (all metal) with slot(s)
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 8739:2026
Fasteners - Parallel grooved pins, with pilot point - Full-length diamond grooves
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 8740:2026
Fasteners - Parallel grooved pins, with chamfer point - Full-length diamond grooves
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 8741:2026
Fasteners - Reverse-taper grooved pins - Half-length progressive grooves
00.99BAS/TC 1615.10.202524.10.2025
prBAS EN ISO 8744:2026
Fasteners - Taper grooved pins - Full-length progressive grooves
00.99BAS/TC 1615.10.202524.10.2025