BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS EN IEC 63044-4/Cor1:2025 Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS | 40.20 | BAS/TC 19 | 11.06.2025 | 05.08.2025 |
nsBAS EN IEC 63044-4/Cor2:2025 Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS | 40.20 | BAS/TC 19 | 11.06.2025 | 05.08.2025 |
nsBAS EN IEC 63044-5-1/A1:2025 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up | 40.20 | BAS/TC 19 | 11.06.2025 | 05.08.2025 |
nsBAS EN IEC 63044-5-2/A1:2025 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments | 40.20 | BAS/TC 19 | 11.06.2025 | 05.08.2025 |
nsBAS EN IEC 63044-5-3/A1:2025 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments | 40.20 | BAS/TC 19 | 11.06.2025 | 05.08.2025 |
nsBAS EN IEC 63110-1:2025 Protocol for management of electric vehicles charging and discharging infrastructures - Part 1: Basic definitions, use cases and architectures | 40.20 | BAS/TC 35 | 11.06.2025 | 10.08.2025 |
nsBAS EN IEC 63119-2:2025 Information exchange for electric vehicle charging roaming service - Part 2: Use cases | 40.20 | BAS/TC 35 | 11.06.2025 | 10.08.2025 |
nsBAS EN IEC 63128/A1:2025 Lighting control interface for dimming - Analogue voltage dimming interface for electronic current sourcing controlgear | 40.20 | BAS/TC 19 | 11.06.2025 | 05.08.2025 |
nsBAS EN IEC 63281-1:2025 E-Transporters - Part 1: Terminology and classification | 40.20 | BAS/TC 35 | 11.06.2025 | 10.08.2025 |
nsBAS EN IEC 63345:2025 Energy efficiency systems - Simple external consumer display | 40.20 | BAS/TC 19 | 11.06.2025 | 05.08.2025 |
nsBAS EN IEC 63356-1:2025 LED light source characteristics - Part 1: Data sheets | 40.20 | BAS/TC 19 | 11.06.2025 | 05.08.2025 |
nsBAS EN IEC 63356-2:2025 LED light source characteristics - Part 2: Design parameters and values | 40.20 | BAS/TC 19 | 11.06.2025 | 05.08.2025 |
nsBAS EN IEC 63403-1:2025 Horticultural lighting - LED packages for horticultural lighting - Part 1: Specification sheet | 40.20 | BAS/TC 19 | 11.06.2025 | 05.08.2025 |
nsBAS EN IEC 63403-2:2025 Horticultural lighting - LED packages for horticultural lighting - Part 2: Binning | 40.20 | BAS/TC 19 | 11.06.2025 | 05.08.2025 |
nsBAS EN IEC 63522-8:2025 Electrical relays - Tests and measurements - Part 8: Timing | 40.20 | BAS/TC 18 | 13.05.2025 | 06.07.2025 |
nsBAS EN ISO 10297:2025 Gas cylinders - Cylinder valves - Specification and type testing | 40.20 | BAS/TC 41 | 23.05.2025 | 22.07.2025 |
nsBAS EN ISO 11243:2025 Cycles - Luggage carriers for bicycles - Requirements and test methods | 40.20 | BAS/TC 35 | 11.06.2025 | 10.08.2025 |
nsBAS EN ISO 14083:2025 Greenhouse gases - Quantification and reporting of greenhouse gas emissions arising from transport chain operations | 40.20 | BAS/TC 35 | 11.06.2025 | 10.08.2025 |
nsBAS EN ISO 14456:2025 Gas cylinders - Gas properties and associated classification (FTSC) codes | 40.20 | BAS/TC 41 | 23.05.2025 | 22.07.2025 |
nsBAS EN ISO 16486-1:2025 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General | 40.20 | BAS/TC 53 | 09.06.2025 | 08.08.2025 |