BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
---|---|---|---|---|
nsBAS EN 676/Cor1:2024 Forced draught burners for gaseous fuels | 40.20 | BAS/TC 31 | 04.06.2024 | 03.08.2024 |
nsBAS EN 88-1:2024 Safety and control devices for gas burners and gas burning appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa | 40.20 | BAS/TC 31 | 04.06.2024 | 03.08.2024 |
nsBAS EN 88-2:2024 Safety and control devices for gas burners and gas burning appliances - Part 2: Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa | 40.20 | BAS/TC 31 | 04.06.2024 | 03.08.2024 |
nsBAS EN 88-3:2024 Safety and control devices for gas burners and gas burning appliances - Part 3: Pressure and/or flow rate regulators for inlet pressures up to and including 500 kPa, electronic types | 40.20 | BAS/TC 31 | 04.06.2024 | 03.08.2024 |
nsBAS EN IEC 61215-1-1:2024 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules | 40.20 | BAS/TC 56 | 28.05.2024 | 26.07.2024 |
nsBAS EN IEC 80000-6:2024 Quantities and units - Part 6: Electromagnetism | 40.20 | BAS/TC 38 | 20.06.2024 | 18.08.2024 |
nsBAS EN ISO 10715:2024 Natural gas - Gas sampling | 40.20 | BAS/TC 31 | 04.06.2024 | 03.08.2024 |
nsBAS EN ISO 11210:2024 Jewellery and precious metals - Determination of platinum - Gravimetry using ammonium chloride | 40.20 | BAS/TC 38 | 20.06.2024 | 18.08.2024 |
nsBAS EN ISO 11490:2024 Jewellery and precious metals - Determination of palladium - Gravimetry using dimethylglyoxime | 40.20 | BAS/TC 38 | 20.06.2024 | 18.08.2024 |
nsBAS EN ISO 1179-2:2024 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) | 40.20 | BAS/TC 4 | 31.05.2024 | 29.07.2024 |
nsBAS EN ISO 13520:2024 Determination of ferrite content in austenitic stainless steel castings | 40.20 | BAS/TC 4 | 31.05.2024 | 29.07.2024 |
nsBAS EN ISO 13686:2024 Natural gas - Quality designation | 40.20 | BAS/TC 31 | 04.06.2024 | 03.08.2024 |
nsBAS EN ISO 14284:2024 Steel and iron - Sampling and preparation of samples for the determination of chemical composition | 40.20 | BAS/TC 4 | 31.05.2024 | 29.07.2024 |
nsBAS EN ISO 14556:2024 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method | 40.20 | BAS/TC 4 | 31.05.2024 | 29.07.2024 |
nsBAS EN ISO 16610-62:2024 Geometrical product specifications (GPS) - Filtration - Part 62: Linear areal filters: Spline filters | 40.20 | BAS/TC 38 | 20.06.2024 | 18.08.2024 |
nsBAS EN ISO 204:2024 Metallic materials - Uniaxial creep testing in tension - Method of test | 40.20 | BAS/TC 4 | 31.05.2024 | 29.07.2024 |
nsBAS EN ISO 25178-700:2024 Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments | 40.20 | BAS/TC 38 | 20.06.2024 | 18.08.2024 |
nsBAS EN ISO 2613-1:2024 Analysis of natural gas - Silicon content of biomethane - Part 1: Determination of total silicon by atomic emission spectroscopy (AES) | 40.20 | BAS/TC 31 | 04.06.2024 | 03.08.2024 |
nsBAS EN ISO 3252:2024 Powder metallurgy - Vocabulary | 40.20 | BAS/TC 4 | 31.05.2024 | 29.07.2024 |
nsBAS EN ISO 3611:2024 Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of micrometers for external measurements | 40.20 | BAS/TC 38 | 20.06.2024 | 18.08.2024 |