prBAS EN ISO 8742:2027
Fasteners - Grooved pins - One-third-length center grooves
General information
Status:Project
Number of pages:11
Adoption method:Proglašavanje
Language:engleski
Edition:2.
Realization date:08.10.2026
Forseen date for next stage code:19.10.2026
Technical committee:BAS/TC 16, Mechanical elements
ICS:
21.060.50, Pins, nails
Abstract
This document specifies the characteristics of grooved pins with one-third-length centre oval grooves (with closed ends), in steel and stainless steel, and with a nominal diameter from 1 mm to 25 mm.
These grooved pins are designed to fulfil the main following functions:
relative rotation of the assembled parts, and
positioning or guiding,
with an easy installation (due to its symmetrical shape) and a medium level of pull-out resistance (due to the elastic fit behaviour of the pin).
The general requirements (including functional principles for grooved pins and assembly) are specified in ISO 13669.
Lifecycle
...
Original document and degree of correspondence
EN ISO 8742:2026, identical
ISO 8742:2026, identical
Relation to BAS standards
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login