BAS EN ISO 14001:2017 adopted by translations method
BAS EN ISO 14001:2017, Environmental management systems – requirements with guidance for use, was adopted by translation method.
News
BAS IEC 60050-426:2017 adopted by translation method
BAS IEC 60050-426: 2017, International Electrotechnical Vocabulary - Part 426: Equipment for explosive atmospheres, was adopted by translation method.
Standards for quantities and units are under revision
The ISO/IEC 80000 quantities and units series is referenced in the International Bureau of Weights and Measurements (BIPM)’s guide on the International System of Units and thus provides significant support for the definition of quantities and units. It consists of 13 different parts, featuring 11 of ISO and 2 from IEC, some of which are approaching final stage of their revision.
BAS IEC 60050-415: 2017 adopted by translation method
The first edition of the BiH standard BAS IEC 60050-415: 2017, International Electrotechnical Vocabulary - Part 415: wind turbine generator systems, was adopted by translation method.
The future of airports
According to the International Air Transport Association (IATA), passenger numbers are likely to surge in the next couple of decades. IATA expects 7.2 billion passenger to travel by air, a near doubling of today’s 3.8 billion level.
Vocabulary for pressure equipment
The second edition of the new BiH standard BAS EN 764-1 + A1: 2016, Pressure equipment - Part 1: Vocabulary, has been published which is adopted by translation of European standard EN 764-1: 2015 + A1: 2016, Pressure equipment - Part 1: Vocabulary
BAS Work Programme for the adoption of standards 2017
In accordance with the requirements of Regulation (EU) no. 1025/2012 governing the European standardization system
New edition of BiH standard which defines generic principles and guidelines for risk management
New second edition of BiH standard BAS ISO 31000: 2016, Risk management - Principles and guidelines, has been published. The standard was adopted by method of translation of the international standard ISO 31000: 2009, Risk management - Principles and guidelines.
Standard for manual sampling of oil and liquid petroleum products
Third edition of the new BiH standard BAS EN ISO 3170: 2016, Petroleum liquids - Manual sampling, has been published, which is adopted by translating the European standard EN ISO 3170: 2004, Petroleum liquids - Manual sampling, that is identical to the international standard ISO 3170: 2004 Petroleum liquids - Manual sampling.
BAS IEC 60050-826: 2016 adopted by translation method
The third edition of the BiH standard BAS IEC 60050-826: 2016, International Electrotechnical Vocabulary - Part 826: Electrical installations was adopted by the translation method.
New BiH Standard Adopted by Translation Method in the Field of Construction
BAS EN 1991-3: 2016 Eurocode 1: Actions on structures - Part 3: Actions induced by cranes and machinery (EN 1991-3: 2006, IDT; EN 1991-3: 2006/AC: 2012, IDT) BAS EN 1991-4: 2016 Eurocode 1: Actions on structures - Part 4: Silos and tanks (EN 1991-4: 2006, IDT; EN 1991-4: 2006/AC: 2012, IDT)
Engaging consumers in standards development
Regional workshop “Engaging consumers in standards development” was held in Vienna (Austria) from 7- 9 December 2016 and was hosted by the Austrian Standards Institute - ASI.
BAS EN 62053-21: 2016 adopted by translation method
The second edition of BiH standard BAS EN 62053-21: 2016, Electricity metering Equipment (ac) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2), was adopted by translation method.
New ISO handbook for adventure tourism safety
Developing, implementing and maintaining a safety management system requires a big effort. to assist adventure tourism providers in this task, a new handbook has been published by ISO.
Regional Conference "Benefits of quality management in public administration"
Under the auspices of the Office of the Coordinator for Public Administration Reform and the German Society for International Cooperation (GIZ) a regional conference on the "Benefits of quality management in public administration” was held In Sarajevo on 17 and 18 November 2016.
ISO Published New Technical Specification ISO/TS 9002
In early November 2016, the International Organization for Standardization ISO has published a new technical specification ISO/TS 9002, Guidelines for the application of ISO 9001: 2015. This technical specification provides guidelines and examples that allow users to implement quality management system, regardless of the size of their organization.
How to Meet EU Market Demands
Upon the invitation of the editor and moderator of this week's edition of “I choose the guests”, Mr. Bruno Bojić, President of the Foreign Trade Chamber of BiH, the guests at this show were: Mr. Aleksandar Cincar - Director of the Institute for Standardization, Mr. Ševal Suljkanović - CEO of Bimal, Mr. Vladan Nastić - General Director of AD “Alpro” Vlasenica, and Mr. Kemal Čolak - CEO of “PROMO” Donji Vakuf.
Adoption of standards for energy efficiency in buildings is one of the key factors of sustainable development of mankind
International Organization for Standardization (ISO) rolls out a campaign on energy efficiency from 7 to 11 November 2016. Below is an article of Mr. Ljubiša Tanić, experts in the field of HVAC (Heating, Ventilation and Air Conditioning Systems), a member of the Technical Committee BAS/TC 47, Appliances and systems for heating and refrigiration
Study Visit of the Delegation of the Czech Republic to the Institute for Standardization of BiH
Representatives of the Czech Office for Standards, Metrology and Testing (ÚNMZ) Mr. Miroslav Chloupek, Ms. Jindra Kafková and Ms. Klára Popadičová, and Czech experts for the development of national annexes for snow and wind Ph.D. Jana Markova, expert associate of the Czech Technical University and Dr. Luboš Němec, representative of the Hydrometeorological Institute of the Czech Republic, as well as an expert for the development of national annexes for seismic actions, Ph.D. Ivan Prachar. are paying a study visit to the Institute for Standardization of BiH from 31 October 2016 until 2 November 2016, which is organized within the project “Support to the Institute for Standardization of Bosnia and Herzegovina in the field of application of Eurocodes”.