prBAS EN ISO 8690:2027
Measurement of radioactivity - Gamma ray and beta emitting radionuclides - Test method to assess the ease of decontamination of surface materials
General information
Status:Project
Number of pages:37
Adoption method:Proglašavanje
Language:engleski
Edition:1.
Realization date:09.11.2026
Forseen date for next stage code:27.11.2026
Technical committee:BAS/TC 63, VS1 - General standardization
ICS:
13.280, Radiation protection
27.120.20, Nuclear power plants. Safety
17.040.20, Properties of surfaces
27.120.20, Nuclear power plants. Safety
17.040.20, Properties of surfaces
Abstract
This document applies to the testing of surfaces that may become contaminated by radioactive materials.
The ease of decontamination is a property of a surface and an important criterion for selecting surface
materials used in the nuclear industry, interim storage or disposal facilities from which contamination can
be removed easily and rapidly without damaging the surface. The test described in this document is a rapid
laboratory-based method to compare the ease of decontamination of different surface materials.
The results from the test can be one parameter to take into account when selecting surface coatings such
as varnish or impervious layers such as ceramics and other surfaces. The radionuclides used in this test
are those commonly found in the nuclear industry (137Cs, 134Cs and 60Co) in aqueous form. The test can also be adopted for use with other radionuclides and other chemical forms, depending on the customer requirements, if the solutions are chemically stable and do not corrode the test specimen.
The test does not measure the ease of decontamination of the surface materials in practical use, as this
depends on the radionuclide(s) present, their chemical form, the duration of exposure to the contaminant
and the environmental conditions amongst other factors.
The test method is not intended to describe general decontamination procedures or to assess the efficiency of decontamination procedures (see ISO 7503-1 to ISO 7503-3).
The test method is not suitable for use of radiochemicals if the radionuclide emits low energy gamma rays or beta particles that are readily attenuated in the surface.
Lifecycle
...
Original document and degree of correspondence
EN ISO 8690:2026, identical
ISO 8690:2024, identical
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login