BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
| Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
|---|---|---|---|---|
| nsBAS EN ISO 11908:2026 Binders for paints and varnishes - Amino resins - General methods of test | 40.20 | BAS/TC 39 | 09.04.2026 | 09.06.2026 |
| nsBAS EN ISO 11909:2026 Binders for paints and varnishes - Polyisocyanate resins - General methods of test | 40.20 | BAS/TC 39 | 09.04.2026 | 09.06.2026 |
| nsBAS EN ISO 12572/A1:2026 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method - Amendment 1 | 40.20 | BAS/TC 36 | 08.05.2026 | 07.07.2026 |
| nsBAS EN ISO 12609-1:2026 Eye and face protection against intense light sources used on humans and animals for cosmetic and medical applications - Part 1: Specification for products | 40.20 | BAS/TC 14 | 15.04.2026 | 15.06.2026 |
| nsBAS EN ISO 12628/A1:2026 Thermal insulating products for building equipment and industrial installations - Determination of dimensions, squareness and linearity of preformed pipe insulation - Amendment 1 | 40.20 | BAS/TC 36 | 08.05.2026 | 07.07.2026 |
| nsBAS EN ISO 12863:2026 Standard test method for assessing the ignition propensity of cigarettes | 40.20 | BAS/TC 63 | 15.05.2026 | 14.07.2026 |
| nsBAS EN ISO 12957-2:2026 Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test | 40.20 | BAS/TC 22 | 20.04.2026 | 19.06.2026 |
| nsBAS EN ISO 13165-3:2026 Water quality - Radium-226 - Part 3: Test method using coprecipitation and gamma-ray spectrometry | 40.20 | BAS/TC 7 | 20.04.2026 | 20.06.2026 |
| nsBAS EN ISO 13341:2026 Gas cylinders - Fitting of valves to gas cylinders | 40.20 | BAS/TC 41 | 22.05.2026 | 20.07.2026 |
| nsBAS EN ISO 13426-2:2026 Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites | 40.20 | BAS/TC 22 | 20.04.2026 | 19.06.2026 |
| nsBAS EN ISO 13428:2026 Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage | 40.20 | BAS/TC 22 | 20.04.2026 | 19.06.2026 |
| nsBAS EN ISO 13431:2026 Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour | 40.20 | BAS/TC 22 | 20.04.2026 | 19.06.2026 |
| nsBAS EN ISO 13433:2026 Geosynthetics - Determination of dynamic perforation (cone drop test) | 40.20 | BAS/TC 22 | 20.04.2026 | 19.06.2026 |
| nsBAS EN ISO 13473-5:2026 Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture | 40.20 | BAS/TC 22 | 20.04.2026 | 19.06.2026 |
| nsBAS EN ISO 13503-2:2026 Oil and gas industries including lower carbon energy - Completion fluids and materials - Part 2: Measurement of properties of proppants used in hydraulic fracturing and gravel-packing operations | 40.20 | BAS/TC 11 | 01.04.2026 | 30.06.2026 |
| nsBAS EN ISO 13628-1:2026 Oil and gas industries including low carbon energy - Design and operation of subsea production systems - Part 1: General requirements and recommendations | 40.20 | BAS/TC 11 | 01.04.2026 | 30.06.2026 |
| nsBAS EN ISO 13669:2026 Fasteners - Grooved pins - General requirements | 40.20 | BAS/TC 16 | 08.04.2026 | 07.06.2026 |
| nsBAS EN ISO 13670:2026 Fasteners - Reverse-taper grooved pins - One quarter-length progressive grooves on both sides | 40.20 | BAS/TC 16 | 08.04.2026 | 07.06.2026 |
| nsBAS EN ISO 13672:2026 Fasteners - Parallel grooved pins - Half-length diamond grooves | 40.20 | BAS/TC 16 | 08.04.2026 | 07.06.2026 |
| nsBAS EN ISO 13802:2026 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing | 40.20 | BAS/TC 50 | 13.05.2026 | 12.07.2026 |