BAS standards at public enquiry
Institute for Standardization of Bosnia and Herzegovina, on the proposal of BAS technical committees, announces a public enquiry on draft national standards (stage code 40.20).
Deadline for submission of comments on draft national standards is 60 days from the publication of the enquiry on the Institute's website (if necessary, it can be shortened to no less than 30 days).
The drafts of BAS standards are available to our stakeholders via online module for reading the draft of BAS standards, and basic information about the draft (title, scope, technical committee that prepared the draft for public discussion, etc.) is available on the ISBIH website.
The request for access to the draft BAS standard at the public enquiry should be sent to email: stand@isbih.gov.ba. To be able to access the online module for reading the draft BAS standards, you must be registered on our website.
Written comments on the draft national standards (with the designation of BAS technical committee and the reference designation of the BAS draft standards) shall be submitted to the Institute.
To fill this form correctly, see the Comment Form Use Guide.
| Standard reference | Stage code | BAS/TC | Real date | Forseen date for next stage code |
|---|---|---|---|---|
| nsBAS EN ISO 10513:2026 Fasteners - Prevailing torque hexagon nuts - High nuts (all metal), with fine pitch thread | 40.20 | BAS/TC 16 | 08.04.2026 | 07.06.2026 |
| nsBAS EN ISO 10519/A1:2026 Rapeseed - Determination of chlorophyll content - Spectrometric method - Amendment 1: Preparation of the calibration curve to determine the k factor | 40.20 | BAS/TC 43 | 28.04.2026 | 27.06.2026 |
| nsBAS EN ISO 10833:2026 Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test | 40.20 | BAS/TC 36 | 08.05.2026 | 07.07.2026 |
| nsBAS EN ISO 10855-1:2026 Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers | 40.20 | BAS/TC 11 | 01.04.2026 | 30.06.2026 |
| nsBAS EN ISO 10855-2:2026 Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets | 40.20 | BAS/TC 11 | 01.04.2026 | 30.06.2026 |
| nsBAS EN ISO 10855-3:2026 Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing | 40.20 | BAS/TC 11 | 01.04.2026 | 30.06.2026 |
| nsBAS EN ISO 10928:2026 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use | 40.20 | BAS/TC 53 | 20.05.2026 | 18.07.2026 |
| nsBAS EN ISO 11074:2026 Soil quality - Vocabulary | 40.20 | BAS/TC 7 | 20.04.2026 | 20.06.2026 |
| nsBAS EN ISO 11118:2026 Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods | 40.20 | BAS/TC 41 | 22.05.2026 | 20.07.2026 |
| nsBAS EN ISO 11125-5:2026 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure | 40.20 | BAS/TC 39 | 09.04.2026 | 09.06.2026 |
| nsBAS EN ISO 11126-1:2026 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification | 40.20 | BAS/TC 39 | 09.04.2026 | 09.06.2026 |
| nsBAS EN ISO 11127-8:2026 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 8: Field determination of water-soluble chlorides | 40.20 | BAS/TC 39 | 09.04.2026 | 09.06.2026 |
| nsBAS EN ISO 11265:2026 Environmental solid matrices - Determination of the specific electrical conductivity | 40.20 | BAS/TC 7 | 20.04.2026 | 20.06.2026 |
| nsBAS EN ISO 11350:2026 Water quality - Determination of the genotoxicity of water and waste water - Salmonella/microsome fluctuation test (Ames fluctuation test) | 40.20 | BAS/TC 7 | 20.04.2026 | 20.06.2026 |
| nsBAS EN ISO 11357-3:2026 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization | 40.20 | BAS/TC 50 | 13.05.2026 | 12.07.2026 |
| nsBAS EN ISO 11357-6:2026 Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) | 40.20 | BAS/TC 50 | 13.05.2026 | 12.07.2026 |
| nsBAS EN ISO 11465:2026 Sludge and solid environmental matrices - Determination of dry residue or water content and calculation of the dry matter fraction on a mass basis | 40.20 | BAS/TC 7 | 20.04.2026 | 20.06.2026 |
| nsBAS EN ISO 11680:2026 Machinery for forestry - Safety requirements and testing for portable pole mounted powered pruners | 40.20 | BAS/TC 45 | 16.04.2026 | 15.06.2026 |
| nsBAS EN ISO 11781:2026 Molecular biomarker analysis - Requirements and guidance for single-laboratory validation of qualitative real-time polymerase chain reaction (PCR) methods | 40.20 | BAS/TC 43 | 28.04.2026 | 27.06.2026 |
| nsBAS EN ISO 1183-1:2026 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method | 40.20 | BAS/TC 50 | 13.05.2026 | 12.07.2026 |