prBAS ISO 12164-6:2025
Hollow taper interface with flange contact surface — Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ES
General information
Status:Project
Number of pages:12
Adoption method:Korice
Language:engleski
Edition:1.
Realization date:08.11.2024
Forseen date for next stage code:24.03.2025
Technical committee:BAS/TC 40, Machinery and tools
ICS:
25.060.20, Dividing and tool-workpiece holding devices
Abstract
This document specifies dimensions for receivers with taper and flange contact surfaces for hollow taper shanks (HSK) in accordance with ISO 12164-5 to be applied to machine tools (e.g. machines for turning, drilling, milling and grinding).
This document specifies three types of receivers:
— type AS for automatic tool change;
— type CS for manual tool change only, via radial holes in both the receiver and the tool shank;
— type ES for automatic tool change.
NOTE 1 The receivers of types AS, CS and ES fit the HSK shanks of types AS, CS and ES (according to ISO 12164-5).
NOTE 2 HSK shanks of types AS and ES can also be changed manually.
Lifecycle
...
Original document and degree of correspondence
ISO 12164-6:2023, identical
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login