pnBAS EN 10025-6+A1:2024
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
General information
Status:Project
Number of pages:28
Adoption method:Proglašavanje
Language:engleski
Edition:4.
Realization date:22.02.2024
Forseen date for next stage code:14.03.2024
Technical committee:BAS/TC 4, Steel, steel products, non-ferrous metals and alloys
ICS:
77.140.10, Heat-treatable steels
77.140.50, Flat steel products and semi-products
77.140.50, Flat steel products and semi-products
Abstract
This document specifies technical delivery conditions for flat products of high yield strength alloy special steels. The grades and qualities are given in Tables 1 to 3 (chemical composition) and Tables 4 to 6 (mechanical properties) and are supplied in the quenched and tempered condition.
The steels specified in this document are applicable to hot-rolled flat products with a minimum nominal thickness of 3 mm and a maximum nominal thickness of 200 mm for grades S460, S500, S550, S620 and S690, a maximum nominal thickness of 125 mm for grades S890 and S960, in steels which, after quenching and tempering, have a specified minimum yield strength of 460 MPa to 960 MPa.
Lifecycle
...
Original document and degree of correspondence
EN 10025-6:2019+A1:2022, identical
Relation to BAS standards
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login