pnBAS EN ISO 204:2024
Metallic materials - Uniaxial creep testing in tension - Method of test
General information
Status:Project
Number of pages:52
Adoption method:Proglašavanje
Language:engleski
Edition:3.
Realization date:22.02.2024
Forseen date for next stage code:14.03.2024
Technical committee:BAS/TC 4, Steel, steel products, non-ferrous metals and alloys
ICS:
77.040.10, Mechanical testing of metals
Abstract
This document specifies the methods for:
a) uninterrupted creep tests with continuous monitoring of extension;
b) interrupted creep tests with periodic measurement of elongation;
c) stress rupture tests where normally only the time to fracture is measured;
d) a test to verify that a predetermined time can be exceeded under a given force, with the elongation or extension not necessarily being reported.
NOTE A creep test can be continued until fracture has occurred or it can be stopped before fracture.
Lifecycle
...
Original document and degree of correspondence
EN ISO 204:2023, identical
ISO 204:2023, identical
Relation to BAS standards
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login