pnBAS EN 1106:2024
Manually operated taps for gas burning appliances
General information
Status:Project
Number of pages:41
Adoption method:Proglašavanje
Language:engleski
Edition:3.
Realization date:08.04.2024
Forseen date for next stage code:11.04.2024
Technical committee:BAS/TC 31, Gas and gas engineering
ICS:
23.060.40, Pressure regulators
Abstract
EN 13611:2019, Clause 1 applies with the following modification and addition:
Modification:
The 1st paragraph of EN 13611:2019, Clause 1 is replaced by:
This document specifies the safety, design, construction, and performance requirements and testing for manually operated taps and presetting taps for burners and appliances burning one or more gaseous fuels, hereafter referred to as "taps".
This document is applicable to taps with declared maximum inlet pressures up to and including 50 kPa and of nominal connection sizes up to and including DN 50 for use with one or more fuel gases.
Addition:
This document is not applicable to:
a) manual operated shut-off valves conforming to EN 331:2015;
b) controls which use auxiliary energy (e.g. electrical energy supplied externally).
The 4th paragraph of EN 13611:2019, Clause 1 is removed.
Lifecycle
...
Original document and degree of correspondence
EN 1106:2022, identical
Relation to BAS standards
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login