nsBAS EN ISO 10447:2024
Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds
General information
Status:Project
Number of pages:8
Adoption method:Proglašavanje
Language:engleski
Edition:3.
Realization date:26.03.2024
Forseen date for next stage code:25.05.2024
Technical committee:BAS/TC 2, Welding and allied processes
ICS:
25.160.40, Welded joints
Abstract
This document specifies the procedures and recommended tooling to be used for peel and chisel testing of resistance spot and embossed projection welds. This document applies to welds made in two or more sheets in the thickness range of 0,5 mm to 3,0 mm.
The aim of these tests is to determine:
— weld size and failure mode when welds are destructively tested;
— verification of welds by non-destructive chisel tests.
NOTE The preferred method of peel testing seam welds (mechanized peel testing) is covered in ISO 14270.
Lifecycle
...
Original document and degree of correspondence
EN ISO 10447:2022, identical
ISO 10447:2022, identical
Relation to BAS standards
Work material
Only members of the technical committee have access to work material. If you are a members of this technical committee you need to login to view the documents. Login